For an aviation project, the high foot traffic, longevity of structures and safety standards must be considered to satisfy all performance requirements. Tremco CPG provides total solutions ranging from waterproofing, fire protection, flooring finishes, weatherproofing sealants, and concrete strengthening products that are guaranteed to enhance the longevity of an airport structure.
 |
A powdered admixture used for compensation and total overall reduction of net shrinkage for Portland Cement concrete. Conex can be used for all slab-on-grade concrete applications. |
 |
A patented polypropylene / polyethylene macro synthetic fibre used to replace steel fibres, welded wire mesh and conventional reinforcing bars in a wide variety of applications. Tuf-Strand SF can be used to strengthen and reinforce structures in a wide variety of concrete applications. |
A low odour, water-based curing and sealing compound that enables fresh concrete to maintain adequate moisture during curing, seals the surface, and provides an attractive sheen.
An economical water based acrylic curing and sealing compound. This product assists in maintaining adequate moisture content and protection to new concrete, so that the desired properties can develop during the curing stage.
A single component, dual shrinkage compensated, high performance micro concrete for formwork repairs.
Ideal for all kinds of concrete repairs where formwork is required.
A single component, polymer modified, cementitious repair mortar designed for re-constructing damaged vertical and overhead concrete and masonry structures.
A single component bonding agent and anti-corrosion coating for reinforcing steel. Eucopatch P can also be used as a bonding agent for placing fresh concrete or repair mortars onto existing concrete substrates.
A self-levelling, pumpable, dual shrinkage compensated cementitious grout which has extended workability and very high compressive strength. Suitable for applications where form and pour materials are required.
A high-flow epoxy grout designed for applications requiring precision grouting, such as alignment of generators, compressors, electric motors, pumps, or in narrow configurations where flowability is required.
 |
A self-healing and self-repairing sheet waterproofing membrane that features three active layers to keep a watertight barrier. Designed for use over lagging on blindside walls, below grade walls, pile caps, grade beams, under slab, and buried forms such as elevator pits. |
A pre-applied, fully bonded HDPE waterproofing membrane provides a complete barrier to water, moisture, and gas.
For waterproofing of all below grade concrete applications, as well as cut & cover tunnels underground rail networks.
 |
A sheet waterproofing and methane-mitigating membrane consisting of 20 mils (0.5mm) of HDPE, expandable, granular bentonite, and a protective layer of spun-bonded polyester. Designed for use in post-installation submerged conditions, on blindside walls, shotcrete walls and under-slab where hydrostatic water head and/or methane conditions exist. It may also be used on backfilled walls. |
 |
A cementitious crystalline waterproofing compound that provides a permanent barrier against the ingress of water. Can be applied to existing concrete as a slurry via brush or spray, or dry sprinkled onto fresh concrete slabs. |
 |
An integral crystalline waterproofing admixture that is incorporated into the concrete mix design. Suitable for above- and below grade applications such as foundations and basements, tunnels, subways, car parking structures, and waste treatment facilities. |
 |
A sustainable, high performance roof waterproofing system designed for refurbishment and new construction projects. Formulated with 60-70% rapidly renewable bio-content, the AlphaGuard BIO system is an eco-friendly alternative to traditional roofing systems. |
 |
A PUMA-technology based bridge deck waterproofing system that can be roller or spray applied onto bridge and cut & cover tunnel projects to protect the integrity of the structures. |
 |
A polyurea, spray-applied bridge deck waterproofing system designed to protect structural assets from environmental and chemical attack, water ingress, and corrosion. |
 |
A multi-layer, polyurethane traffic coating system that boasts flexible waterproofing and crack bridging properties of up to 1.5mm. Ideal for use in car parking environments where a waterproof barrier is required. |
 |
A polyurethane (PU) traffic coating system that incorporates a technically advanced polyurethane based dissipating moisture barrier. Deckshield LBD ensures the controlled dissipation of moisture vapour from the ground at the lowest basement car park levels. |
 |
A hard-wearing, pigmented, polyurethane-based deck coating system for internal slabs subject to regular vehicular traffic. Ideal for use in busy airport, multi-storey car parking environments. |
 |
A methyl methacrylate (MMA) car park deck coating system that provides a colourful watertight, hard wearing surface for exposed decks. Ideal for use on exposed car park decks and helipads. |
 |
A solvent free, epoxy self-smoothing floor coating that has excellent resistance to hydraulic fluids (such as Skydrol). Applied at 2-3mm, this floor coating has been designed for use in heavy-use aircraft hangars. |
 |
A three pack, solvent free, high build epoxy resin based coating with excellent resistance to hydraulic fluids (such as Skydrol). This coating is designed for use in light-to-medium duty aircraft hangars. |
 |
A solvent-free epoxy coating system with excellent chemical resistance for environments that are subject to occasional chemical spillages. This coating is applied at a thickness of 2-3mm, and is suitable for area of the development that require a high degree of chemical resistance. |
 |
A high-gloss, self-smoothing, general use epoxy floor finish, designed to provide protection and dustproofing for high trafficked areas. Applied at a thickness of 2-3mm, this system would be suitable for warehouse, back-of-house, and baggage handling areas. |
 |
A hard-wearing, antimicrobial, cementitious polyurethane floor screed applied in a seamless matt finish of 3-4mm thickness. This floor system is suitable for use in areas where a hygienic finish is imperative, such as central kitchen areas and food storage facilities. |
 |
A range of epoxy terrazzo flooring systems that provide a highly customisable, decorative, and seamless finish that will stand the test of time. An ideal floor finish for front of house areas where a highly durable finish is required, such as passenger terminal buildings, passport control, and baggage claim. |
 |
An aesthetically pleasing epoxy flake floor coating that provides a seamless, hard wearing, but decorative finish. Ideal for areas of light to medium levels of foot traffic such as retail, restaurants, and food courts. |
 |
A semi-dry cementitious screed which incorporates proprietary additives that produce an early drying, high strength screed. Isocrete K-Screed can be laid bonded, un-bonded or floating for areas subject to high traffic such as airport terminals. |
 |
A liquid densifier and reactive sealer that dust-proofs and improves the surface density, durability, and abrasion resistance of concrete surfaces. A low cost option for sealing concrete floors in warehouses, back of house areas and loading bays. |
A water-based polymeric densifier and protectant that improves the appearance and durability of concrete floors.
UltraGuard can be used alone or in combination with a reactive sealer such as Euco Diamond Hard to give concrete floors a glossy finish, harder surface, and protective seal.
 |
Decorative concrete products that improve the appearance and performance of dull, bare concrete. Solutions include colour hardeners, concrete staining, and a wide range of stamped concrete options. Ideal for external landscaping areas. |
 |
Cost-effective external wall insulation systems, anti-crack render systems and interior finishes that can be installed in-situ or prefabricated off-site. An ideal solution for the terminal building façade. |
 |
A semi self-levelling polyurethane joint sealant that has exceptional primerless adhesion, UV resistance and movement capability. Ideal for expansion joints in aircraft hangars, sidewalks, and on runways. |
A two-component, jet-fuel resistant, tar-modified, self-levelling polyurethane sealant.
Ideal for expansion joints in environments trafficked by aircrafts.
A pitch-free, high performance, two-part elastomeric sealant. Specifically developed for sealing contraction and expansion joints in concrete paved areas, roads, bridge decks, airfield runways, taxiways, fuelling areas, and transport depots.
 |
Pre-compressed, self-expanding foam tapes used for sealing vertical and horizontal joints in almost every type of gap that requires a seal. |
 |
A single-component, neutral cure silicone sealant for 2-sided structural glazing. Can be used for Curtain Walling (included cap, toe, heel and air seals), general sealing/jointing, silicone structural glazing (in 2 sided systems), weather seal in butt (2 sided) and stopless (4 sided) glazing systems, and sealing joints within curtain/window systems. |
 |
A premium grade weather seal with a movement accommodation of +/- 50%. Designed for use as a weather seal sealant in applications where a high degree of joint movement is anticipated such as in structurally glazed curtainwall or aluminium cladding. |
 |
A general-purpose silicone weather seal with excellent mechanical resistance and weathering capabilities. Designed for use in curtainwalls, facades and perimeter joints. |
 |
A neutral cure silicone weather seal with excellent weathering characteristics and a movement accommodation of +/- 50%. Can be used as a general-purpose weather seal sealant designed for use in curtainwalls and facades, perimeter calking and moving joints. |
 |
A fast-track one-coat, low VOC, high-build, hybrid intumescent coating with a fire rating of up to 120 minutes. Can be used for on-site application of structural steel in main terminal buildings. |
 |
A wide range of products designed to slow down the rate that a fire spreads through a building structure. Providing solutions to fill voids, ensuring fires can be contained easily during an outbreak. Solutions include fire curtains, fire rates PU foams, silicone sealants, and pipe closing devices. |
Sign up for our newsletter
